DGSunlight 100W Flexible Monocrystalline Solar Panel 18V for RVs, Boats and Camping
SPECIFICATIONS
This flexible monocrystalline solar panel is designed for users who need lightweight solar power generation for mobile and outdoor use. It is suitable for RVs, camper vans, boats, caravans, tents, car roofs, cabins and small off-grid systems where rigid glass solar panels are not convenient.
The panel is thin, lightweight and flexible, making it easier to install on curved or limited surfaces. It can be used for charging 12V or 24V batteries through a compatible solar charge controller, as well as supporting small DC power applications in outdoor or mobile setups.
Key benefits:
• Flexible design for curved surfaces and compact installations
• Monocrystalline solar cells with up to 21% efficiency according to supplier information
• Lightweight construction for easier transport and installation
• Thin profile for discreet roof, boat, van or camping setups
• Bypass diodes help reduce power loss caused by partial shading
• Mounting holes for easier installation
Use cases:
This solar panel is suitable for RVs, camper vans, boats, golf carts, tricycles, tent roofs, car roofs, cabins, camping setups and small off-grid solar systems.
Available configurations:
100W Solar Panel
- 1 × 100W flexible solar panel
200W Solar Panel
- 2 × 100W flexible solar panels
300W Solar Panel
- 3 × 100W flexible solar panels
400W Solar Panel
- 4 × 100W flexible solar panels
500W Solar Panel
- 5 × 100W flexible solar panels
600W Solar Panel
- 6 × 100W flexible solar panels
800W Solar Panel
- 8 × 100W flexible solar panels
100W Solar Kit
- 1 × 100W flexible solar panel
- 1 × 10A 12V/24V solar charge controller
- 1 set cable with battery clips
- 1 set cable with PV solar connector
200W Solar Kit
- 2 × 100W flexible solar panels
- 1 × 20A 12V/24V solar charge controller
- 1 set cable with battery clips
- 1 set cable with PV solar connector
- 1 pair 2-in-1 solar adapter
300W Solar Kit
- 3 × 100W flexible solar panels
- 1 × 30A 12V/24V solar charge controller
- 1 × 3m extension cable
- 1 × 1m cable with alligator clips
- 1 × 3-in-1 PV parallel adapter
EU compatibility:
This product does not require an EU plug or 230V socket connection. It is designed for solar charging setups and should be connected through a compatible solar charge controller, battery system or solar power setup.
Trust / durability:
The panel uses monocrystalline solar cells, a lightweight flexible body, bypass diodes and pre-installed cables. It is designed for outdoor and mobile applications, but installation should always be done without heavy shading and according to the connected battery and controller requirements.
Important note:
Actual solar output depends on sunlight, installation angle, temperature, shading, weather conditions and the connected charge controller or battery system.








|
MODEL |
10A |
20A |
30A |
|
Battery Voltage |
12V/24V Auto |
||
|
Charging Current |
10A |
20A |
30A |
|
Discharging Current |
10A |
10A |
10A |
|
Max Solar input |
48V(for 24V battery) 24V(for 12V battery) |
||
|
Equalization |
14.4V(Sealed) 14.2V(Gel) 14.6V(Flood) |
||
|
Float charge |
13.7V(defaul,adjustable) |
||
|
Discharge stop |
10.7V(defaul,adjustable) |
||
|
Discharge reconnect |
12.6V(defaul,adjustable) |
||
|
Charge reconnect |
13V |
||
|
Voltage of open light |
Solar Panel 8V(Light lights delay) |
||
|
Voltage of close light |
Solar Panel 8V(Light off delay) |
||
|
USB output |
5V/3A |
||
|
Self-consume |
<10mA |
||
|
Operating temperature |
-35°C~+60°C |
||
|
Size/weight |
133.5*70*35mm |
165g |
|






